Wheel Nut Torque for Jeep Grand Cherokee WJ/WK (1999–2010)
1999–2010 · Australian Market
The wheel nut torque for the Jeep Grand Cherokee WJ/WK (1999–2010) is 136 Nm (≈ 100 ft·lbs), tightened in a star pattern with a calibrated torque wrench.
Wheel Nut Torque
≈ 100 ft·lbs
Socket Size
21mm
Bolt Pattern
5x127mm (5")
Thread Size
1/2-20
Source
NJY professional OE torque chart (p.26) — Grand Cherokee 2004-23: 136 Nm (100 ft-lbs); confirms WJ/WK owner manual
Always verify with your vehicle's owner manual. Use a calibrated torque wrench. TorqSpec accepts no liability for damage or injury.
Frequently Asked Questions
What is the wheel nut torque for the Jeep Grand Cherokee WJ/WK (1999–2010)?
The wheel nut torque for the Jeep Grand Cherokee WJ/WK is 136 Nm (≈ 100 ft·lbs), shown in the torque specification card at the top of this page. Use a calibrated torque wrench set to this value, following the star-pattern tightening sequence shown in the diagram further down this page.
What socket size do I need for Jeep Grand Cherokee wheel nuts?
You'll need a 21mm socket, shown in the Socket Size card in the hardware specifications section of this page. The matching 1/2-20 thread and 5x127mm (5") stud pattern are displayed alongside it in the same grid.
What is the bolt pattern for the Jeep Grand Cherokee WJ/WK?
The Jeep Grand Cherokee WJ/WK uses a 5x127mm (5") bolt pattern (5 studs), shown in the Bolt Pattern card in the hardware specifications section of this page. The thread size is 1/2-20.
What is the correct wheel nut tightening sequence for the Jeep Grand Cherokee?
Tighten the wheel nuts in a star (cross) pattern — never sequentially around the wheel — so clamping force spreads evenly across the 5 studs. The exact tightening sequence for the 5-stud Jeep Grand Cherokee wheel is shown in the diagram on this page. Torque in stages (snug, then half torque, then full torque) and re-check after 50–100 km.
5-Stud Wheel
Correct Tightening Pattern
Sequence: 1 → 3 → 5 → 2 → 4